TEMPUR® Advanced Ergo System™

Technology has given us 24/7 lives and 24/7 stress. What if technology gave us a good 8 hours back? The TEMPUR® Advanced Ergo System™, the sleep system that could only have come from Tempur-Pedic, does just that. You can now enjoy an infinite number of ergonomic rest positions, plus a rejuvenating massage whenever you’d like. With its wireless remote, it electronically adjusts to your every need to create a place of true Night-time Renewal for body and mind™.

Combine selected Tempur‑Pedic mattresses with our exclusive Ergo System base to create your own personalized TEMPUR® Advanced Ergo System™. The wall-hugging design keeps you close to your nightstand while providing support to your head, neck and shoulders in a head-up position.

This item is non-returnable and does not have a tryout period.
Furniture not included.

Select


Adjustable Base Features

Improved Wireless Remote Control

  • Stylish design with easy to understand, LED backlit buttons
  • More user programmable memory pre-sets (4 vs. 1)
  • Programmed to avoid accidental "go to flat" experience
  • Greater range of massage with improved wave quality
  • Enhances consumer experience

Improved Electronics and Lift Motors

  • Exclusive "state of the art" Programmable Logic Controller (PLC)
  • Metal motor housings instead of plastic
  • Stronger pulling/pushing power (+50% vs. current)
  • Longer service life (+200% vs. current)
  • Quieter operation, greater reliability and upgradable

Improved Heavy Duty Frame

  • Longer rails eliminate "foot droop"
  • Sturdier base support with 6 legs vs. 4 legs and 25% more steel
  • Powder coating provides best rust protection
  • Variable height adjustments easily match luxury bed frames (with optional leg extensions)
  • Luxurious appearance and guaranteed trouble-free performance

Improved Position Adjustability

  • Improved upright angle makes it easier to read, watch TV, use a laptop etc. because of a +25% increase in head lift (70° degree vs. 55° degree performance)
  • Unsurpassed wall-hugging design keeps users near their nightstand for convenience
  • Provides improved comfort and relaxation experience, improves breathing and relieves stress on lower back

Reserve Power Supply

  • 9 volt battery back-up
  • Bed can be lowered during power outage or remote failure

Adjustable Headboard Brackets

  • Reinforced for stability
  • Adjust to fit popular headboard sizes

20 Year Limited Warranty

What is the height of the Ergo System base?

With standard legs and casters installed, the overall height is approximately 15 3/4" floor to the bottom of the mattress. The distance between the floor and the bottom edge of the base, with standard legs and casters installed, is approximately 7 5/8".

Is it possible to raise the height of the Ergo System base?

Yes, you can add up to 4" to the overall height of the Ergo System by ordering the riser leg set. These include 6 replacement legs with casters, and come with either an overall height of approximately 8" or 10". Please note that the riser leg set replaces the standard leg set that comes with the Ergo System. They are not used together.

Does the Ergo System base come with footboard attachments?

No, you cannot attach a footboard directly to the Ergo System base. However, you can use a "freestanding" bed including headboard, footboard and side rails by placing the complete Ergo System within the assembled bed. It may be easiest to assemble the bed around the Ergo System. You should measure the inside dimensions of the assembled bed to be sure the Ergo System will fit. One of our riser leg sets may be required in some cases.

Will the Ergo System fit inside existing furniture?

The Ergo System is designed to fit into most "freestanding" beds. We always recommend you measure the inside dimensions of the assembled bed to be sure the Ergo System will fit. Please refer to the specifications for exact dimensions of the base. One of our riser leg sets may be required in some cases.

Adjustable Base Features

Head and Foot Adjustments

  • Adjusts the Head and Foot sections to the desired positions. Press until the red LED Signature Light illuminates and desired position is achieved.

Bed "Flat" Button

  • To level the Ergo System to the Flat position, press until the red LED Signature Light illuminates.

NOTE: All functions are temporarily disabled for approximately 20 seconds to allow the Ergo System to reset after the "FLAT cycle has
been completed.

Memory Buttons

  • Your TEMPUR® Advanced Ergo System™ can store up to four (4) Memory positions.
  • To Set a Memory Position: When in desired position, press and hold Memory button until the LED Signature Light flashes 3 times to signal Memory position is stored.
  • To Recall a Memory Position: Press and hold the corresponding Memory button until the red LED Signature Light illuminates.
  • Do not hold for more than five (5) seconds, otherwise a new Memory position could be set. If the LED Signature Light begins to flash, you are reprogramming the Memory position.

Head and Foot Massage Adjustments

  • Turns on the Head and Foot Massage units (starting at intensity 5 of 10).
  • Slowly increases or decreases Massage Intensity. To increase Massage Intensity, press the (+) button. To decrease Massage Intensity, press the (-) button.

Massage Stop

  • Press and hold STOP button until the red LED Signature Light illuminates and the Massage feature stops. The Massage feature is designed to automatically shut off after 30 minutes of continuous use. The unit will reset after 5 minutes, and the Massage feature will again be available for use.
  • You MUST stop Massage motors each time before switching between wave speeds/types.

Wave Massage SPEED Adjustments

  • If the Massage feature is off, press any Wave Speed button to initiate the Wave Massage feature. Each button represents a different Wave Speed. If the Wave Massage feature is already on, you must first stop the massage by pressing the STOP button, and then press the desired Wave Speed; otherwise the Wave Massage feature will not start.

NOTE: If the massage motors are operating and the "FLAT" button is pressed, the massage motors will stop operating during the lowering of the Ergo System. To then resume massage operation, press the Head and/or Foot Massage Adjustments or select a Wave Speed.

Additional Wireless Remote Control Features

  • To aid in the visibility of the Wireless Remote control in low light environments, the buttons are backlit and will light up when a button is pressed.
  • You are able to control your Ergo System with the Wireless Remote control without pointing the Wireless Remote control directly at the receiver (best transmission range is within 9 feet or 3 meters).

NOTE: An unintentional touch to any button that does not illuminate the red LED Signature Light on the wireless remote control will cause the keys to light up without performing the associated function. Press the appropriate wireless remote control button until the red LED Signature Light illuminates to activate the desired function. This feature was installed to prevent any undesired movement should the wireless remote control be dropped, etc.

Adjustable Base Specifications
Bed Type A. Frame width B. Base width C. Base Length Weight
Twin 33 1/2" 37 1/2" 74 1/4" 168 lbs.
Twin Long 33 1/2" 37 1/2" 79" 172 lbs.
Double 48 3/4" 53 1/4" 75" 218 lbs.
Double Long 48 3/4" 53 1/4" 79" 224 lbs.
Split Queen 26 1/4" 29 1/2" 79" 136 lbs.
Split CA King 33 1/2" 35 3/4" 82 3/4" 159 lbs.